| | Sector | abcCivil Works | Tender Value | 1.50 Lakhs approx. | | Location | Uttarakhand - India | Ref.No | 89492928 | | Closing Date | 11 - Nov - 2025 | | | | C/o 40 Nos. Type-II Qtrs. (F/S), 4 Nos. Type- IV Qtrs. (T/S) & One No. Type-V Qtr. Including EI, fans, fixtures for 34th Bn. ITBP at Halduchaur (U.K.) (SH- Balance Work of E&M installations) (SH- Providing feeder pillar panel for Type-IV & Type-V Quarter building) Supplying, installation, testing & commissioning of free standing, IP42 construction, cubical type indoor LT panel suitable for 415V, 3 Phase, 4Wire, 50Hz AC supply system, fabricated in compartmentalized design from 2.0 mm thick CRCA sheet steel, 3mm thick passivated gland plates, depth not less than 400 mm, cleaning, processing & finishing complete with 7/8 tank process for powder coating in approved shade, with upto following rating aluminum bus-bars, insulated with heat shrinkable PVC tape, DMC/SMC supports, earth bus made out of 25mm × 5mm tinned copper strip running across the width of the panel, solid connections from main bus bar to switchgears, control wiring with 2.5 Sqmm FRLS insulated multistranded copper conductor S/C FRLS cable, cable alley i/c providing and fixing following switchgear, 75X75x5mm Channel base frame mounting etc as per detailed technical specifications and as required (G.A. and schematic Drawings shall be got approved form Engineer-incharge before fabrication), Multifunction meter with RS-485 port, class-0.5S, LED display - 1 Nos, Suitable rating of Class-1 cast resin CT''''s - 3 Nos, Indication lights (LED type) R-Y-B - 3 Nos, 2A, 10kA SP MCBs, with End locks for protection - 4 Nos, Extra for providing IP-54 double door outdoor type LT panel cubical enclosure for the existing indoor type LT panel cubical enclosure of following rating complete as per specification and requirement etc as required, Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required, Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required, Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
|
|
If you are a new user, then please
register, it's Free and then fill the form below.
If you are registered with us, just fill the form below, we will get back to you
shortly.
|
All fileds marked with '*' are compulsary.
|
|
|
|